Samsung Galaxy S4 has a 5″ 1080p Super AMOLED display (PenTile 441 ppi), a pseudo octa-core Samsung Exynos 5410 or quad-core Qualcomm Snapdragon 600 (depending on region), 2 gigs of RAM, up to 64 gigs of storage, LTE connectivity, and a 2600 mAh battery. Furthermore, the device features additional features such as floating touch and a 13 MP shooter featuring a revamped camera interface.
Android 5.0.1 build has been leaked for the Galaxy S4 i9500. If you are interested in installing this update on your device, then you can follow the detailed guide given below.
Disclaimer: Follow the instructions at your own risk. The writer cannot be held responsible for any bricked or unusable devices. Even though the chances of your Smartphone getting bricked are negligible, the owner of the device must take full responsibility of it!
Pre-requisites and Backing up your Galaxy S4:
- Make a Backup of the SMSs, Call logs and Contacts using the Super Backup App
- Make a Backup of the data on your phone
- Enable USB debugging on your device
- Make sure the device has at least 60% charging
- Backup WhatsApp messages on Android Smartphone and Email
Steps to install Android 5.0.1 on Galaxy S4:
- Make a backup of your data.
- Extract the contents of Odin3 3.10.zip on your computer and install Odin on the PC.
- Turn off the phone and make sure it is not connected to the computer.
- Boot the phone into Download Mode by switching it off and then simultaneously pressing the Volume Down + the Home key button. While holding these both buttons, you need to switch on your device.
- Open Odin. Connect your phone to the computer and allow the drivers to install. You will see the “Added!!” message on Odin. If it doesn’t appear, make sure you have properly installed the USB drivers for your phone.
- In the Odin Menu, make sure to check the Auto-Reboot and F.Reset options.
- Download the firmware zip file on the computer. Extract it.
- Click on AP button and choose the file named AP
- Tap CP button and select the file named MODEM
- Hit CSC and select file named CSC
- Click on PIT and select the .pit file
- Tap BL button and select file named ‘BL’. Ignore the last four steps, if the files do not exist.
- Click the Start button in Odin and wait for a few moments.
- Phone will automatically reboot. Done !