Samsung Galaxy Note Edge has a 5.6″ Super AMOLED screen with curves over the right side of the phone, creating an independant display area used for various menus, widgets and notifications. The device is powered by a 2.5GHz quad-core Qualcomm Snadragon 805 processor, 3GB of RAM and has either 32GB or 64GB of internal storage. It features a 16P camera, heart rate monitor and 3000mAh battery.

XDA developers have created a mod for this device using which you can get a full screen caller ID. The mod is available in the form of a flashable zip file, which can be installed using any custom recovery. A step by step guide for the same has been given below.

Note Edge

Disclaimer: Follow the instructions at your own risk. If the device gets damaged, the writer or the owner of the site must not be held responsible.

Pre-requisites and Backing up your Note Edge:

Requirements:

Steps to install the mod on Note Edge:

  1. Create a Nandroid backup from recovery, in case anything goes wrong.
  2. Download the caller ID zip file and transfer it to the phone.
  3. Switch off the phone and boot the phone into Recovery mode.
  4. Next, wipe the cache and the dalvik cache.
  5. Go to ”Install zip”, then “Select zip”. Choose the caller ID zip file.
  6. After the process is complete, reboot the phone.

You might also like these post :

About Lazy Smurf

I am a tech geek. I keep myself updated with all the recent happenings in the smartphone world. | Add my circles on Google+ :

Comments are closed